Anti-Inflammatory Effects of Essential Oils from the Peels of Citrus Cultivars.

Citrus cultivars have remarkable health benefits, but only the anti-inflammatory activities of the major varieties have been studied. This study investigated the anti-inflammatory effects of various citrus cultivars and their active anti-inflammatory components. The essential oils of 21 citrus peels were extracted via hydrodistillation using a Clevenger-type apparatus, and the chemical compositions of the essential oils were analyzed. D-Limonene was the most abundant constituent. To evaluate the anti-inflammatory effects of the citrus cultivars, the gene expression levels of an inflammatory mediator and proinflammatory cytokines were investigated. Among the 21 essential oils, those extracted from C. japonica and C. maxima exhibited superior anti-inflammatory activities, being able to inhibit the expression of the inflammatory mediators and proinflammatory cytokines in lipopolysaccharide-stimulated RAW 264.7 cells. The essential oils of C. japonica and C. maxima were distinguished into seven distinct constituents, α-pinene, myrcene, D-limonene, ß-ocimene, linalool, linalool oxide, and α-terpineol, compared with other essential oils. The anti-inflammatory activities of the seven single compounds significantly inhibited the levels of inflammation-related factors. In particular, α-terpineol exhibited a superior anti-inflammatory effect. This study showed that the essential oils from C. japonica and C. maxima exhibit high anti-inflammatory activity. In addition, α-terpineol is an active anti-inflammatory compound that contributes to inflammatory responses.

Inhibition of Melanogenesis by Essential Oils from the Citrus Cultivars Peels.

Citrus is one of the most popular and widely grown fruit crops in the world. However, the bioactivity of only certain species of citrus cultivars is studied. In this study, the effects of essential oils from 21 citrus cultivars on melanogenesis were investigated in an effort to identify active anti-melanogenesis constituents. The essential oils from the peels of 21 citrus cultivars obtained by hydro-distillation were analyzed using gas chromatography-mass spectrometry. Mouse melanoma B16BL6 cells were used in all assays conducted in this study. The tyrosinase activity and melanin content were determined using the lysate of α-Melanocyte-stimulated B16BL6 cells. In addition, the melanogenic gene expression was determined by quantitative reverse transcription-polymerase chain reaction. Overall, the essential oils of (Citrus unshiu X Citrus sinensis) X Citrus reticulata, Citrus reticulata, and ((Citrus unshiu X Citrus sinensis) X Citrus reticulata) X Citrus reticulata provided the best bioactivity and comprised five distinct constituents compared to other essential oils such as limonene, farnesene, ß-elemene, terpinen-4-ol, and sabinene. The anti-melanogenesis activities of the five individual compounds were evaluated. Among the five essential oils, ß-elemene, farnesene, and limonene showed dominating properties. The experimental results indicated that (Citrus unshiu X Citrus sinensis) X Citrus reticulata, Citrus reticulata, and ((Citrus unshiu X Citrus sinensis) X Citrus reticulata) X Citrus reticulara are potential candidates with anti-melanogenesis activity for use as cosmetics and pharmaceutical agents against skin hyperpigmentation.

Bacterial catabolism of acetovanillone, a lignin-derived compound.

Bacterial catabolic pathways have considerable potential as industrial biocatalysts for the valorization of lignin, a major component of plant-derived biomass. Here, we describe a pathway responsible for the catabolism of acetovanillone, a major component of several industrial lignin streams. Rhodococcus rhodochrous GD02 was previously isolated for growth on acetovanillone. A high-quality genome sequence of GD02 was generated. Transcriptomic analyses revealed a cluster of eight genes up-regulated during growth on acetovanillone and 4-hydroxyacetophenone, as well as a two-gene cluster up-regulated during growth on acetophenone. Bioinformatic analyses predicted that the hydroxyphenylethanone (Hpe) pathway proceeds via phosphorylation and carboxylation, before ß-elimination yields vanillate from acetovanillone or 4-hydroxybenzoate from 4-hydroxyacetophenone. Consistent with this prediction, the kinase, HpeHI, phosphorylated acetovanillone and 4-hydroxyacetophenone. Furthermore, HpeCBA, a biotin-dependent enzyme, catalyzed the ATP-dependent carboxylation of 4-phospho-acetovanillone but not acetovanillone. The carboxylase's specificity for 4-phospho-acetophenone (kcat/KM = 34 ± 2 mM-1 s-1) was approximately an order of magnitude higher than for 4-phospho-acetovanillone. HpeD catalyzed the efficient dephosphorylation of the carboxylated products. GD02 grew on a preparation of pine lignin produced by oxidative catalytic fractionation, depleting all of the acetovanillone, vanillin, and vanillate. Genomic and metagenomic searches indicated that the Hpe pathway occurs in a relatively small number of bacteria. This study facilitates the design of bacterial strains for biocatalytic applications by identifying a pathway for the degradation of acetovanillone.

Thermoplasticity reinforcement of ethanol organosolv lignin to improve compatibility in PLA-based ligno-bioplastics: Focusing on the structural characteristics of lignin.

Commonly, lignin macromolecules have limitations in application to the thermoplastics industries due to poor dispersibility and interfacial compatibility within ligno-bioplastics. In this study, the dispersibility and interfacial compatibility of ethanol organosolv lignin (EOL) in PLA-based ligno-bioplastic were improved by enhancing the thermoplasticity via oxypropylation. Further, three types of EOLs extracted from different severity conditions were applied to investigate the effect of the structural characteristics of EOLs on the changes in the thermal properties. The thermal properties of oxypropylated EOL were dependent on the structural characteristics of the initial EOL as well as the degree of polymerization of propylene oxide. The thermoplasticity of EOLs extracted under mild condition was effectively increased as a new Tg and melting were observed. Based on increased thermoplasticity, the dispersibility and interfacial compatibility of EOL within PLA-based ligno-bioplastic were successfully improved, which compensates for the deterioration in mechanical strength of ligno-bioplastic due to the addition of unmodified EOL. Therefore, oxypropylation of EOL with suitable structural characteristics promises improved availability as a thermoplastic material.

Exogenous chalcone synthase expression in developing poplar xylem incorporates naringenin into lignins.

Lignin, a polyphenolic polymer, is a major chemical constituent of the cell walls of terrestrial plants. The biosynthesis of lignin is a highly plastic process, as highlighted by an increasing number of noncanonical monomers that have been successfully identified in an array of plants. Here, we engineered hybrid poplar (Populus alba x grandidentata) to express chalcone synthase 3 (MdCHS3) derived from apple (Malus domestica) in lignifying xylem. Transgenic trees displayed an accumulation of the flavonoid naringenin in xylem methanolic extracts not inherently observed in wild-type trees. Nuclear magnetic resonance analysis revealed the presence of naringenin in the extract-free, cellulase-treated xylem lignin of MdCHS3-poplar, indicating the incorporation of this flavonoid-derived compound into poplar secondary cell wall lignins. The transgenic trees also displayed lower total cell wall lignin content and increased cell wall carbohydrate content and performed significantly better in limited saccharification assays than their wild-type counterparts.

Bacterial Transformation of Aromatic Monomers in Softwood Black Liquor.

The valorization of lignin, a major component of plant-derived biomass, is essential to sustainable biorefining. We identified the major monoaromatic compounds present in black liquor, a lignin-rich stream generated in the kraft pulping process, and investigated their bacterial transformation. Among tested solvents, acetone extracted the greatest amount of monoaromatic compounds from softwood black liquor, with guaiacol, vanillin, and acetovanillone, in an approximately 4:3:2 ratio, constituting ~90% of the total extracted monoaromatic content. 4-Ethanol guaiacol, vanillate, and 4-propanol guaiacol were also present. Bacterial strains that grew on minimal media supplemented with the BL extracts at 1mM total aromatic compounds included Pseudomonas putida KT2442, Sphingobium sp. SYK-6, and Rhodococcus rhodochrous EP4. By contrast, the extracts inhibited the growth of Rhodococcus jostii RHA1 and Rhodococcus opacus PD630, strains extensively studied for lignin valorization. Of the strains that grew on the extracts, only R. rhodochrous GD01 and GD02, isolated for their ability to grow on acetovanillone, depleted the major extracted monoaromatics. Genomic analyses revealed that EP4, GD01, and GD02 share an average nucleotide identity (ANI) of 98% and that GD01 and GD02 harbor a predicted three-component carboxylase not present in EP4. A representative carboxylase gene was upregulated ~100-fold during growth of GD02 on a mixture of the BL monoaromatics, consistent with the involvement of the enzyme in acetovanillone catabolism. More generally, quantitative RT-PCR indicated that GD02 catabolizes the BL compounds in a convergent manner via the ß-ketoadipate pathway. Overall, these studies help define the catabolic capabilities of potential biocatalytic strains, describe new isolates able to catabolize the major monoaromatic components of BL, including acetovanillone, and facilitate the design of biocatalysts to valorize under-utilized components of industrial lignin streams.

Evaluation of Xylooligosaccharides Production for a Specific Degree of Polymerization by Liquid Hot Water Treatment of Tropical Hardwood.

Eucalyptus pellita is known as attractive biomass, and it has been utilized for eucalyptus oil, furniture, and pulp and paper production that causes a significant amount of byproducts. Liquid hot water treatment depending on combined severity factor (CSF) was subjected to isolate hemicellulose fraction from E. pellita and to produce xylooligosaccharides (XOS). The xylan extraction ratio based on the initial xylan content of the feedstock was maximized up to 77.6% at 170 °C for 50 min condition (CSF: 1.0), which had accounted for XOS purity of 76.5% based on the total sugar content of the liquid hydrolysate. In this condition, the sum of xylobiose, xylotriose, and xylotetraose which has a low degree of polymerization (DP) of 2 to 4 was determined as 80.6% of the total XOS. The highest XOS production score established using parameters including the xylan extraction ratio, XOS purity, and low DP XOS ratio was 5.7 at CSF 1.0 condition. XOS production score evaluated using the CSF is expected to be used as a productivity indicator of XOS in the industry (R-squared value: 0.92).

Selective deconstruction of hemicellulose and lignin with producing derivatives by sequential pretreatment process for biorefining concept.

For improving the economic efficiency of the biorefining concept, selective decomposition and separation of biomass components is indispensable. In this respect, a sequential pretreatment process consisting of liquid hot water treatment and diluted peracetic acid (PAA) treatment was proposed for total utilization of lignocellulosic woody biomass. During the liquid hot water treatment, hemicellulose can be decomposed efficiently without significant loss of cellulose and lignin, implying the possibility for xylooligomer production by thermochemical treatment. In the PAA treatment, lignin was successfully degraded and liquefied using a 50% diluted PAA solvent, suggesting the possibility of dicarboxylic acid production. After the sequential process proposed in this study, the cellulose accessibility to the enzyme could be maximized by inducing selective deconstruction of hemicellulose and lignin.

Evaluation of correlation between glucan conversion and degree of delignification depending on pretreatment strategies using Jabon Merah.

The main purpose of this study was to investigate the glucan conversion rate after enzymatic hydrolysis depending on the treatment methods and conditions with changes in the chemical composition of treated solid fraction of Jabon Merah. The glucan conversion rate (17.4%) was not significantly improved after liquid hot water treatment (1st step) even though most of the hemicellulose was dissolved into liquid hydrolysate. Subsequently, dilute acid, organosolv, and peracetic acid treatment (2nd step) was conducted under various conditions to enhance glucan conversion. Among the 2nd step treatment, the glucan conversion rate of organosolv (max. 46.0%) and peracetic acid treatment (max. 65.9%) was increased remarkably through decomposition of acid-insoluble lignin (AIL). Finally, the glucan conversion rate and AIL content were highly correlated, which was revealed by the R-squared value (0.84), but inhibitory factors including cellulose crystallinity must be considered for advanced glucan conversion from highly recalcitrant biomasses, such as Jabon Merah.

Levulinic acid production by two-step acid-catalyzed treatment of Quercus mongolica using dilute sulfuric acid.

The objectives of this research were to produce a levulinic acid by two-step acid-catalyzed treatment of Quercus mongolica and to investigate the effect of treatment parameter (reaction temperature range: 100-230°C; sulfuric acid (SA) concentration range: 0-2%) on the levulinic acid yield. After 1st step acid-catalyzed treatment, most of the hemicellulosic C5 sugars (15.6gg/100gbiomass) were released into the liquid hydrolysate at the reaction temperature of 150°C in 1% SA; the solid fraction, which contained 53.5% of the C6 sugars, was resistant to further loss of C6 sugars. Subsequently, 2nd step acid-catalyzed treatment of the solid fractions was performed under more severe conditions. Finally, 16.5g/100g biomass of levulinic acid was produced at the reaction temperature of 200°C in 2% SA, corresponding to a higher conversion rate than during single-step treatment.